For office furniture customization such as office conference tables, there are many things to pay attention to when choosing, such as the cutting, punching and edge banding of the process, the quality of the edge banding strips on the material and their respective advantages and disadvantages are all places we need to consider. Today, the editor will talk about the knowledge of edge banding strips of office furniture such as panel office conference tables, so that we can learn more about these knowledge to choose good panel office furniture. The typical edge banding process is as follows: spraying anti-adhesive agent, milling edge, preheating workpiece, applying glue, pressing edge banding, cutting edge banding strips, front and back truncation, upper and lower rough trimming, upper and lower fine trimming, tracking trimming, scraping trimming, scraping glue layer, cloth wheel polishing, quality inspection. A good edge banding machine is formed in one step in the above process, and the glue used is environmentally friendly hot melt glue (PUR glue), and it is formed in one step from spraying anti-adhesive agent to the subsequent cloth wheel polishing. The quality of edge banding is also very important. I recommend the Liyouli special-shaped edge banding series and the PVC edge banding series. Liyouli edge banding is not only of high quality, safe and environmentally friendly, but also suitable for manual edge banding machines. It is not easy to debond, not easy to deform, wear-resistant and anti-collision. It is a good choice. Responsible furniture factories will also perform edge banding on all four sides of the board, not just one or two sides that consumers can see. I often hear panel furniture sales staff talk about how good edge banding is, and how bad edge banding technology affects formaldehyde content. In fact, this introduction is not accurate and rigorous, because whether the board is environmentally friendly is related to the formaldehyde content, and has no direct relationship with edge banding. Good edge banding or multi-sided edge banding can only reduce the emission of formaldehyde per unit time (that is, the emission rate is slowed down), but will not reduce the formaldehyde content of the board. The advantage of this is that the formaldehyde emission per unit time of boards that are not environmentally friendly (such as E2 grade) can be reduced to a level that humans can accept without affecting health. Xiamen Liyouli Industry & Trade Co., Ltd. is a modern enterprise that manufactures furniture edge banding strips. Its main products include PVC edge banding strips, ABS edge banding strips, acrylic edge banding strips, special-shaped edge banding strips, etc. Liyouli edge banding strips are safe and environmentally friendly, do not turn white after cutting, and have good weather resistance. Sales hotline: 0592-8168150

PVC edge banding advantage: 1. Diverse appearance: PVC edge banding can imitate various materials, such as wood grain, marble, cloth grain, etc., with rich visual effects. 2. Lightweight: Compared to solid wood edge banding, PVC edge banding is lighter and easier to process and install. 3. Wear resistance: PVC material has good wear resistance and can resist scratches during daily use. 4. Waterproof and moisture-proof: PVC edge banding can effectively prevent moisture infiltration and is suitable for humid environments. 5. High cost-effectiveness: PVC edge banding is relatively affordable and an economical choice. 6. High production efficiency: Modern furniture production equipment is abundant, and modular furniture is easy to handle. Disadvantages: 1. Unstable quality: The quality of PVC edge banding on the market varies greatly, and some products may be prone to aging and breakage. 2. Obvious color difference: After trimming, there may be color difference in the PVC edge banding, which affects the appearance. 3. Poor high temperature resistance: PVC edge banding is prone to deformation in high temperature environments. Solid wood edge banding advantage: 1. Natural texture: Solid wood edge banding has the texture and texture of natural wood, beautiful and natural. 2. Strong environmental friendliness: Solid wood edge banding has superior environmental performance and does not contain harmful substances. 3. Soft and not easily deformed: Solid wood edge banding is soft and not easily deformed, and has good adhesion to furniture boards after bonding. Disadvantages: 1. Weak moisture resistance: Solid wood edge banding has poor moisture resistance and is prone to deformation or cracking due to moisture. 2. Expensive price: The production cost of solid wood edge banding is relatively high, and the price is relatively expensive. 3. High processing difficulty: A high level of craftsmanship is required during the processing of solid wood edge banding to ensure the edge banding effect. In summary, PVC edge banding and solid wood edge banding each have their own advantages and disadvantages. When choosing, comprehensive consideration can be given to factors such as the furniture's usage environment, personal aesthetics, and budget.

Plastic edge banding is widely used in furniture manufacturing and other fields due to its diverse advantages. The following is a detailed introduction to its significant advantages: 1. Diverse materials and rich performance PVC (polyvinyl chloride) edge banding: • High cost-effectiveness: PVC raw materials are widely available and the production process is mature, making the price of PVC edge banding relatively affordable. It can effectively control the production cost of furniture and is suitable for large-scale production of economical furniture. Good flexibility: The molecular structure of PVC endows it with excellent flexibility, allowing it to easily bend and fit the edges of various shapes of boards. Whether it is straight, curved, or irregular boards, it can achieve tight wrapping and meet diverse furniture design needs. Strong printing adaptability: Through advanced printing technology, PVC edge banding can present rich and diverse colors and realistic textures, such as wood grain, stone grain, cloth grain, etc., which can almost imitate the appearance of any natural material, adding beauty and design to furniture. ABS (acrylonitrile butadiene styrene copolymer) edge banding: • High strength and durability: The unique ternary copolymer structure of ABS gives it excellent comprehensive performance, especially high wear resistance and impact resistance. In daily use, it can resist frequent friction and collision, is less prone to scratches and damage, extends the service life of furniture, and is suitable for furniture with high durability requirements. Good chemical stability: It has strong resistance to common acids, bases, oils, and other chemical substances, is not easily corroded, and can maintain stable performance even when used in environments that are prone to chemical substances such as kitchens and bathrooms, without discoloration, deformation, and other problems. Exquisite appearance: The surface is smooth and delicate, with a uniform and full color. After special treatment, the trimming effect is excellent, and the color of the edge sealing side is consistent with the surface color. The overall texture is high-end, enhancing the level of furniture. Acrylic edge banding: • High transparency and glossiness: Acrylic has a high transparency similar to glass, good glossiness, and can give furniture a bright and fashionable appearance, creating a high-end and elegant visual effect. It is commonly used in modern furniture that pursues unique design styles. Excellent weather resistance: Acrylic edge banding can maintain stable physical properties and appearance under different environmental conditions, such as temperature changes, light exposure, etc., and is not easily aged or faded. Even if exposed to outdoor or direct sunlight for a long time, it can still maintain a bright appearance for a long time. Environmental hygiene: Acrylic material itself is non-toxic and harmless, meeting environmental standards. It will not release harmful substances during furniture use, ensuring user health. It is particularly suitable for children's furniture, food contact furniture, etc. 2. Convenient processing and improved production efficiency Easy cutting: Plastic edge banding has a relatively soft texture, and can be easily cut to the desired size using ordinary cutting tools such as art knives, scissors, or professional cutting equipment. The operation is simple and fast, reducing processing time and costs. Easy to stick: It has good bonding performance with the board and can be quickly and firmly attached to the edge of the board under appropriate temperature and pressure conditions using hot melt adhesive or other specialized glue. This convenient pasting method is suitable for large-scale automated production and improves the production efficiency of furniture manufacturing enterprises. Rapid molding: During the edge sealing process, the plastic edge banding strip can quickly adapt to the shape of the board. Through processes such as heating and pressure, it can be tightly adhered to the board in a short period of time, forming a stable edge sealing structure and further accelerating the production process. 3. Excellent protective performance, extending the lifespan of furniture Wear resistance: As the first line of defense for furniture panel edges, plastic edge banding can effectively resist various frictions in daily use, such as wiping, object scraping, etc., preventing damage to the surface of the panel and maintaining the integrity and aesthetics of furniture appearance. Moisture and Waterproof: Tightly adhere to the edge of the board to form a sealed structure, preventing external moisture from entering the interior of the board. This is crucial for preventing the board from expanding, deforming, moldy, and rotting due to moisture, especially for furniture used in humid environments such as kitchen cabinets, bathroom cabinets, etc., greatly extending the service life of furniture. Anti corrosion: Some plastic edge banding strips have chemical stability, which can prevent the edges of the board from coming into direct contact with chemicals, avoid damage to the board caused by chemical corrosion, and ensure the stability and durability of the furniture structure. 4. Continuously improving environmental performance Low formaldehyde emissions: With the increasing environmental requirements, many plastic edge banding products strictly control the addition of harmful substances such as formaldehyde during the production process, and even use formaldehyde free formulas to ensure that the formaldehyde emissions of edge banding products meet national environmental standards, providing consumers with healthy and safe furniture products. • Recyclable: Some plastic edge banding materials are recyclable, and after the end of the furniture's service life, the edge banding part can be recycled and reprocessed to reduce waste emissions to the environment, in line with the concept of sustainable development.

The future development trend of edge banding manufacturers is influenced by various factors, as follows: In terms of market demand The demand for personalized customization is growing: Consumers' demand for personalized and differentiated home furnishings is constantly increasing. Edge banding manufacturers need to provide more colors, textures, materials, and special shapes of edge banding, such as handle free, curved, and irregular edge banding, to meet different design styles and functional requirements. The demand for integration is highlighted: "Integration of board and edge" requires that the color, texture, and even touch of the edge banding and board be consistent, and the market demand for edge banding that can achieve seamless connection and strong overall feeling is increasing. In terms of technological innovation • Edge banding technology upgrade: The application of new edge banding technologies such as laser edge banding will become increasingly widespread. Edge banding manufacturers need to develop laser edge banding products that are compatible with them, such as Huali 2.0 laser edge banding from Huali Corporation, which has a built-in laser functional layer at the bottom and can achieve seamless edge banding. • Material and process innovation: Continuously exploring and developing new edge banding materials, such as those with better wear resistance, water resistance, chemical resistance, and other properties. At the same time, improving production processes, enhancing production efficiency and product quality, and reducing costs, such as upgrading extrusion processes to achieve automated winding and cutting. In terms of environmental policies Stricter standards: Countries and regions have increasingly strict environmental requirements for home products. Edge banding manufacturers need to use more environmentally friendly raw materials and production processes to ensure that their products meet relevant environmental standards, such as E1 level, ENF level, and other formaldehyde emission standards. Green production has become inevitable: In the production process, manufacturers will use more clean energy, reduce the discharge of wastewater, exhaust gas, and waste residue, and achieve green production to meet environmental policy requirements and consumer demand for green products. In terms of industry competition • Increased brand competition: With fierce market competition, brand awareness and reputation will become important factors for consumers to choose edge banding products. Manufacturers need to strengthen brand building, enhance brand image and influence. Industry chain integration trend: Some powerful edge banding manufacturers may extend upstream, integrate raw material supply, and reduce procurement costs; Expand downstream, establish closer cooperation with furniture production enterprises, provide one-stop solutions, and enhance market competitiveness. In terms of digitization and intelligence Intelligent production: By utilizing advanced production equipment and automation technology, the production process can be made intelligent and automated, improving production efficiency and product quality stability, and reducing labor costs. • Digital marketing: expand sales channels, improve brand awareness and product exposure, and better meet customer needs through Internet platforms and digital marketing means, such as e-commerce platforms, social media, online exhibitions, etc.

According to the shape characteristics of the edges of the processed parts, the edge sealing of panel furniture can be divided into straight edge sealing and curved edge sealing. With the increasing promotion of panel furniture, while maintaining direct edge sealing production, it is necessary to add some curved components to beautify the product shape and improve the value of the entire workpiece. However, the processing speed of curve edge banding is slow, which not only increases the aesthetic appeal but also limits the production speed. At present, the edge banding of panel furniture is mostly carried out on edge banding machines. The selection and configuration of edge banding machines mainly depend on the shape characteristics of the workpiece to be processed, the type of edge banding material, and also consider issues such as productivity and quality. Edge banding machines can be divided into manual, semi-automatic, and fully automatic according to their degree of automation. Straight edge banding can use ordinary straight edge banding machines, as well as soft forming edge banding machines, post forming edge banding machines, double end edge banding machines, etc. Relatively speaking, curve edge banding is more complex and can be performed using manual edge banding machines, machining centers, semi-automatic or fully automatic CNC edge banding machines.

In the factories of edge banding manufacturers, everyone knows that PVC edge banding is a product mainly made of polyethylene. During the production process, some additives such as plasticizers, lubricants, and stabilizers are added, and after several processes, a plastic roll is completed. It is widely used in our daily lives. However, there are a few issues that need to be pointed out, that is, the dimensional stability of PVC edge banding is not very good. After studying, the staff of Oudeya found that there are several factors that have a great impact on PVC edge banding. Let me explain them in detail to you.

Common Problems and Analysis of Furniture Edge Sealing 1. When performing edge trimming procedures, the edges are prone to detachment The glue coating is too thin; The material is too cold or damp (especially when just glued); If the glue line is clearly visible and displays the pattern of the glue roller, it may be because the temperature of the glue roller is too low; The conveyor belt speed is too slow; The temperature of the surrounding environment or materials is too low (working below 15 ° C); Insufficient pressure. 2. The initial position and location of the edge banding are not ideal The roller pressing wheel needs to master the skills to make adjustments, and extend the position to increase the roller pressure. The 125px position at the beginning or end of the adhesive surface of the adhesive roller is often not ideal, because the adhesive roller at the head and tail positions is prone to insufficient pressure, and when in high-speed production, the contact between the adhesive roller and the panel is prone to jumping. 3. The effect of bonding both sides is good on one side and not good on the other Poor contact between the panel (substrate) and the pressure wheel; Uneven application of glue leads to glue leakage, which hinders the edge sealing process. 4. Intermittent poor adhesion condition The liquid state of hot melt adhesive is too low in temperature; When the edge banding machine is tuned too fast and the amount of glue applied is too high, the hot melt cylinder fails to melt the hot melt adhesive in a timely manner, resulting in uneven glue application; The temperature of the hot melt machine is unstable.

1. Poor plasticization of PVC edge banding (1) There is a toad skin like phenomenon on the surface of the plastic layer. (2) The temperature control is low, the instrument pointer reflects a low temperature, and the actual measured temperature is also low. (3) The surface of the plastic is blackened and has small cracks or poorly plasticized particles. (4) The plastic glue is not sewn well, with a clear mark.