For office furniture customization such as office conference tables, there are many things to pay attention to when choosing, such as the cutting, punching and edge banding of the process, the quality of the edge banding strips on the material and their respective advantages and disadvantages are all places we need to consider. Today, the editor will talk about the knowledge of edge banding strips of office furniture such as panel office conference tables, so that we can learn more about these knowledge to choose good panel office furniture. The typical edge banding process is as follows: spraying anti-adhesive agent, milling edge, preheating workpiece, applying glue, pressing edge banding, cutting edge banding strips, front and back truncation, upper and lower rough trimming, upper and lower fine trimming, tracking trimming, scraping trimming, scraping glue layer, cloth wheel polishing, quality inspection. A good edge banding machine is formed in one step in the above process, and the glue used is environmentally friendly hot melt glue (PUR glue), and it is formed in one step from spraying anti-adhesive agent to the subsequent cloth wheel polishing. The quality of edge banding is also very important. I recommend the Liyouli special-shaped edge banding series and the PVC edge banding series. Liyouli edge banding is not only of high quality, safe and environmentally friendly, but also suitable for manual edge banding machines. It is not easy to debond, not easy to deform, wear-resistant and anti-collision. It is a good choice. Responsible furniture factories will also perform edge banding on all four sides of the board, not just one or two sides that consumers can see. I often hear panel furniture sales staff talk about how good edge banding is, and how bad edge banding technology affects formaldehyde content. In fact, this introduction is not accurate and rigorous, because whether the board is environmentally friendly is related to the formaldehyde content, and has no direct relationship with edge banding. Good edge banding or multi-sided edge banding can only reduce the emission of formaldehyde per unit time (that is, the emission rate is slowed down), but will not reduce the formaldehyde content of the board. The advantage of this is that the formaldehyde emission per unit time of boards that are not environmentally friendly (such as E2 grade) can be reduced to a level that humans can accept without affecting health. Xiamen Liyouli Industry & Trade Co., Ltd. is a modern enterprise that manufactures furniture edge banding strips. Its main products include PVC edge banding strips, ABS edge banding strips, acrylic edge banding strips, special-shaped edge banding strips, etc. Liyouli edge banding strips are safe and environmentally friendly, do not turn white after cutting, and have good weather resistance. Sales hotline: 0592-8168150

PVC edge banding advantage: 1. Diverse appearance: PVC edge banding can imitate various materials, such as wood grain, marble, cloth grain, etc., with rich visual effects. 2. Lightweight: Compared to solid wood edge banding, PVC edge banding is lighter and easier to process and install. 3. Wear resistance: PVC material has good wear resistance and can resist scratches during daily use. 4. Waterproof and moisture-proof: PVC edge banding can effectively prevent moisture infiltration and is suitable for humid environments. 5. High cost-effectiveness: PVC edge banding is relatively affordable and an economical choice. 6. High production efficiency: Modern furniture production equipment is abundant, and modular furniture is easy to handle. Disadvantages: 1. Unstable quality: The quality of PVC edge banding on the market varies greatly, and some products may be prone to aging and breakage. 2. Obvious color difference: After trimming, there may be color difference in the PVC edge banding, which affects the appearance. 3. Poor high temperature resistance: PVC edge banding is prone to deformation in high temperature environments. Solid wood edge banding advantage: 1. Natural texture: Solid wood edge banding has the texture and texture of natural wood, beautiful and natural. 2. Strong environmental friendliness: Solid wood edge banding has superior environmental performance and does not contain harmful substances. 3. Soft and not easily deformed: Solid wood edge banding is soft and not easily deformed, and has good adhesion to furniture boards after bonding. Disadvantages: 1. Weak moisture resistance: Solid wood edge banding has poor moisture resistance and is prone to deformation or cracking due to moisture. 2. Expensive price: The production cost of solid wood edge banding is relatively high, and the price is relatively expensive. 3. High processing difficulty: A high level of craftsmanship is required during the processing of solid wood edge banding to ensure the edge banding effect. In summary, PVC edge banding and solid wood edge banding each have their own advantages and disadvantages. When choosing, comprehensive consideration can be given to factors such as the furniture's usage environment, personal aesthetics, and budget.